Tokyo City: Architecture and Agriculture

Tokyo City: Architecture and Agriculture Kostof Essay Tokyo city The archaic capitals of Japan, such as Fujiwara-Kyà ´ (694-710 AD), Nara (710-784 AD), and Kyoto (AD 794-1868) conformed to Tangs capital grid-planning. However, grounds of defence, the devisers of Tokyo shunned the grid, preferring instead an irregular network of streets encompassing the Edo Castle grounds. Afterwards, several parts of Tokyo were grid-planned. The history of Tokyo played a significant role in the present architecture of Tokyo city. Tokyo faced two major destructions in its history; first by Great Kanto earthquake and firebomb during the pacific war. After the pacific war Japanese government was bankrupt could not execute citywide redevelopment to support the economy. Instead it embarked on infrastructural development leaving residential and commercial urban development in the hands o local actors. As a result unplanned cities sprang up despite deliberate efforts by the government to plan the city. The city planning and zoning act of 1968 aimed to create a separation between urban and agricultural lands. Despite the government of Japan adopting the city planning and zoning act of 1968 with an intention of separation between urban and agricultural lands, this has not been fully realised.. Since the Meiji restoration Japanese cities have eagerly been trying to apply western planning concepts which set a clear demarcation between urban and rural land use. Despite efforts to pursue this goal, urban periphery landscapes with an apposition of segmented agricultural lands and urban land uses has lived through the history of Japanese cities including Tokyo. Agro-activities take place in Tokyo in more than 900ha of land. Setagaya is one of the most agriculturally active Tokyo wards. Some agro-activities take place at the heart of Tokyo city. Presence of agricultural land in Tokyo city interferes with grid-planning of the city. Some parts of the city are grid-planned while others are not. Le Corbusier likens grid planning to the way a human being walks. Human beings walk on a straight line since they have a goal and know where he is ending to. Man also turns at right angles when he needs to.  [1]  Therefore the oftenness of cross streets is his own decision with topography having little to do with it especially if it is a flat site. It is stepping the land with streets at right angles with each other is the opening move in settlement planning. The grid is the most common pattern of urban planning in history although its use was not uninterrupted through history. The grid is recommended as the standard scheme urban solution for different sites. It is also a means for equitable distribution of land as well as easy allocation of land for trading of real estate. Straight through-streets provide defence. The concentration of buildings into blocks as in grid-planning provides defence too. One common feature with all grids is their orthogonal street pattern. This does not make grids immutable but on the contrary they can curve around irregularities on the ground without betraying its basic logic. In orthogonal street pattern, long streets are straight with short streets joining the long streets at right angle. Structures in Tokyo are organized along wide road and rail network. This is also repeated in the residential areas though in a smaller scale. In the residential areas houses are organized along long lanes (roji) where small shops and restaurants can be found. These lanes are hardly accessible to vehicles. Existence of coordinated array of town does not ensure and orderly extension of the town grids into the surrounding territories. Town grids can only be extended to the surrounding territory only if the city authorities had the power to oversee development in the suburban regions. As mentioned earlier, after the devastating calamities of Great Kant earthquake and the bombing in the Second World War left Japan government bankrupt. As a result, the government was concerned with infrastructural development leaving the urban development in the hands of local actors. Tokyos shimokitazawa neighbourhood is an example of citys incremental urban development. It emerged from a combination of local liberty and an infrastructural retrofitting by the Japanese government. It grew from a village with rice fields in the periphery of Edo to become and a modern urban cultural and commercial hub. Today shimokitazawa has a village and ancient Tokyo atmosphere. The typology of Shimokitazawa is characteriz ed by little low-rise constructions along a complex network mainly of pedestrian streets, busy ground market activity, and tight community networks. Shimokitazawa is one of the areas of Tokyo city that presents deformed grid. Organic city Some parts of Tokyo city can be referred to as organic city. Organic cities grow spontaneously adhering to no master plan, do not enjoy benefit of designers. Alternatively organic citys growth is dependent on passage of time, the lay of land and the day to day lives of the citizens. The result of these forces is irregular non-geometric with incidences of crooked and curved streets and randomly defined open spaces.  [2]  Organic city emerges when development is left in the hands of individuals without a governing body subdividing the land before disposing it off to the people. Spiro agrees with the fact that people have different opinions about organic cities. Some people might chose to find fault with organic city or celebrate its action-packed topography, forthcoming and flexible development of its form, and its culture characterized by communal living. He does not seem to oppose organic cities. He asserts that even planned cities present features characteristic of organic cities. The extent of life in terms of the buildings mass and varying height of buildings marshalled like troops along a city grid can result to picturesque characteristic of unplanned city. Spiro also argues that even the geometrical irregularity of unplanned city is a matter of grade. The streets curve frequently but not canonical. What looks like in orderly arrangement is often a matter of straight streets sections intersecting at random angles, and their linear elements broken with frequent angulated bends.  [3]   According to Spiro planned and organic cities exist side by side e.g. Tokyo and Shimokitazawa most historic towns, mainly those of metropolitan size are puzzles of premeditated and self-generated segments, diversely juxtaposed or interlocked.  [4]  Organic cities may start as shantytowns on unoccupied land at the remote edges of town, or in centrally located areas that are difficult to build up such as steep slopes, canyons, or garbage dumps. Shimokitazawa has many narrow passages that are inaccessible to vehicles which give a true sense of adventure as one explores the town on foot. Second hand clothes shops selling miscellaneous items from the 70s and old animated themed toys are popular. Various cultural festivals are held in Shimokitazawa which showcase the cultural wealth of the town. In the month of February, the town of Shimokitazawa if full of festivity. Various plays are performed in eight small theatres during the month long Shimokitazawa theatre festival. The Tengu-Matsuri festival held at the end of January or early February gives a serene and friendly appeal of Shimokitazawa. The lively Mikoshi-Matsuri festival otherwise called the portable shrine festival is held early September. Organic cities lay both conceptually physically and in the middle of slums and contemporary planned cities. They are a budding environment that increased gradually and spontaneously evolved over generations. Often organic cities are culturally vibrant and creative dependent on local skills and cultural capital. They can provide solutions to challenges facing modern cities such as population density. Organic city are able to support high population density in an environmentally and socially sustainable way. With increase in number of poor people living in degraded urban environments organic cities have potential to shift the paradigm of urbanism. Therefore organic cities should be recognized as a legitimate urban form and developing it from within. The grand manner The tree planted streets of Tokyo city as well as its parks contribute to the citys plan grand manner. Side walks and parkways in the streets of Tokyo city are amazing. The tree- planted sidewalks and parkways give the city a sense of serenity. Some avenues have double rows of trees depending on the width of the sidewalks. For example, on Grand Avenue in South Park where an average 24 inch sidewalk are required, a double row of trees are planted. Road tree in Japan is thought to date back as the middle of the eighth century when trees were planted along the roads for the welfare of travellers. However, only after Japan opened its frontiers that it started to overhaul and thus turning trees to be part of urban landscapes. Black pine, cherry, maple and other species were planted in Tokyo on Ginza Street in 1873. Exotic trees were first used to line the city streets in 1875 when a black locust tree was planted in Tokyo. However because of poor care most of them dried up. In 1907 the government of Japan embarked on a big project of planting trees along city streets of Tokyo. Ten fast growing trees were selected which included among others Trident maple, Plane tree and Ginkgos. Ginkgos was planted in front of Tokyos city hall thus was marked as a street tree in Japan. However this project suffered two major setbacks; the Great Kanto Earthquake that resulted into fires that destroyed more than half the street trees, and bombing of Japan during the Second World War. Tree planting in city streets was part of Tokyos reconstruction process. Even to date Ginkgos remains the preferred street tree in Tokyo. Large number of evergreen trees are planted in wide and high-speed expressways to reduce traffic noise in the surrounding residential areas. Trees creating harmony are preferred for expressways passing through undeveloped areas like mountain foothills. Ginkgo tree has been utilized mainly in designs that c omprise western landscape characteristics. Tokyo National Showa Memorial Park was created in 1983, and sits on a 450-acre parcel of land and Ginkgos forms its allee. The park was created to mark the fifteenth anniversary ascension of Emperor Showa. The place having been occupied by United States Tachikawa military base, the buildings were demolished and hills rebuilt, tree planted and grasses sown to make forests and fields. The relationship of city to its natural environment Urbanization process has led to reduction in green spaces and loss of public spaces. He present urban regeneration projects in Tokyo are aimed at converting ex-industry land and shifting land to high rise building areas. These areas relate weakly with the encompassing city areas. Currently nature scarcely exists in Tokyo. During the Edo Period, samurai residential areas were situated on the high land of the Musashi plateau, while abodes of low caste samurai and tradesmen were situated in the valleys below, making a life space for a variety of living and working areas according to the contour of the land. The Tokyo Bay was visible at a distant from the roads going down from the high land. There were also many places where people could relish the sight of Mount Fuji. Protecting view points of various centres of attraction such as Mt. Fuji is not an important factor in Tokyo city planning. On the contrary emphasis has inclined towards universality rather than the features of the place, and the result is stereotype city space. Like many historical cities, Tokyo is developed close to the rivers and canals. Presently, the rivers are separated from the town by perpendicular embankments, with the buildings having their backs to the polluted rivers. Originally the ideal sites for city architecture were river banks with straight access to the water transportation system. Relationship of the man-made to the natural context The relationship between manmade and the natural in Tokyo can be described as chaotic. The city plan does not give emphasis to visibility of natural features such as Mt. Fuji. Unlike London, where protecting the perspective of Saint Pauls Cathedral from several main points across the city is a key guideline for the city planning, Tokyo does not give much consideration to the view of its esteemed feature in the city. Save for a few parks at the centre of Tokyo, parks and open spaces have reduced compared to those of ancient Edo (Tokyo). Even some of the parks cannot provide the relaxation they were intended because of noise pollution. For example, Uchibori-dori Avenue cuts across the Outer Garden of the Imperial Palace which is next to Hibiya Park. The car noise creates a restless atmosphere within the park. Putting Uchibori-dori Avenue underground, and planting of Japanese black pines would create a large open space area about thirty hectares conducive for events, outdoor stage or sporting events. This would in turn revive the business area in the core of the city which has since lost popularity on holidays. Urban fabric and monuments Tokyo city is a unique in that western or modern and ancient city planning is intertwined in the development of the city. Agricultural land is seen in the city as it is historic of Asian cities. Some people view this kind of coexistence as chaotic mainly because Japan government adopted the western style of city planning that makes a clear demarcation between urban and rural areas which Japan has not been able accomplished. However when looked from historic and cultural perspective, it can be understood as serving an important role in the Japanese cities and specifically in Tokyo. The agricultural land sustains their surrounding population. The urban fabric of Tokyo is often made of a soft residential core, qualified by low-rise and thickly built houses, encircled by a hard shell of taller and larger buildings along broad roads or railways. A new generation of needs has led to changes in building types. For example, apartments are seen to be small and their narrow staircase not providing adequate access. This has made people to migrate form apartments for better housing. The originally neat, modern parks and greenways of the apartments have now become jungles of vegetation. Now efforts are directed towards redeveloping the apartments to attract new residents. Tokyo city has several ancient and modern monuments. In some cases modern and ancient monuments are juxtaposed depicting western and ancient architecture evident in Tokyo city. They also depict the co-existence of western and ancient cultures. An example is Zojoji Temple located next to the Tokyo Tower. In summary Tokyo city can be described as combining grid and organic city in its urban fabric. The city planning and zoning act of 1968 intended to create a separation between urban and agricultural lands. However this attempt has failed to produce the desired results as agricultural lands are still evident in Tokyo city. This makes Asian cities which have borrowed the European way of urban planning, including Tokyo look disorderly. As a result of combining western and ancient styles of city planning, some parts of Tokyo city are grid planned whereas others not. Although the city may look chaotic it has still been able to maintain a grand manner in its streets and open space. Tree planting along the sidewalks and parkways as well as parks such as Ueno contribute to the citys grand manner. Also contributing to the uniqueness of Tokyo city is its monuments some of which are juxtaposed both modern and ancient e.g. Zojoji Temple and Tokyo Tower.

California VS Peterson :: essays research papers

Laci Peterson, a 27-year-old wife who was eight months pregnant, disappeared on December 24, 2002. When the body of the California woman and her unborn child were found four months later, her husband, Scott, was charged with two counts of murder. Detective Craig Grogan gave a sworn statement that he had probable cause to believe Mr. Peterson committed two counts of the crime of 187 Penal Code, homicide, on or about December 23, 2002 or December 24,2002, in the county of Stanislaus. April 17, 2003 at 0658 hours the Judge of the Superior Court in Stanislaus County, California issued a warrant for the arrest of Scott Lee Peterson. The court found that the District Attorney’s office did, in fact, have probable cause to bring Scott Peterson in. The Judge specifically addressed bail in the warrant. No bail was granted. April 18, 2003 at 1110 hours, Scott Peterson was arrested at the Torrey Pines Golf Course, in Sand Diego County, California. At the time of his arrest, Peterson had colored his hair blonde, grown a beard and mustache, and was carrying $15,000.00 in cash. During his arrest police also discovered that Peterson’s car was full of camping and survival equipment. Peterson was arrested less than 20 minutes from the Mexican border. Peterson waived booking in San Mateo County, California, and was transferred back to Stanislaus County, California, where he was formally booked by the Stanislaus County Sheriff’s Department. Scott Peterson had his preliminary hearing on April 17, 2003. Superior Court Judge Al Girolami ordered Scott Peterson to stand trial on two counts of murder. Peterson’s arraignment quickly followed. Peterson was arraigned on April 21, 2003. The Prosecution charged him with the following: Count I: On or about and between December 23, 2002 and December 24, 2002, the defendant did commit a felony, Murder, violation of Section 187 of the California Penal Code; the defendant did willfully, unlawfully, and feloniously and with malice aforethought murder Laci Denise Peterson, a human being. Special Allegation charges were made in conjunction with the felony murder charge of Laci Denise Peterson. It is further alleged as to Count 1, MURDER that the defendant acted intentionally, deliberately and with premeditation. Enhancement: TERMINATION OF PREGNANCY. During the commission of the murder of Laci Denise Peterson, the defendant, with the knowledge that Laci Denise Peterson was pregnant , did inflict injury on Laci Denise Peterson resulting in the termination of her pregnancy, a violation of Section 12022.

Chinese Manufacturer Opens Assembly Plant in Europe

When I was looking for car manufacturers that have opened up assembly plants in Eastern Europe, I stumbled upon some very interesting articles with information I haven’t heard about before. The article of Spiegel, which is a highly reputable German newspaper, is about the Chinese car manufacturer ‘’Great Wall Motors’’ which has opened an assembly plant in Bahovitsa, Bulgaria recently in 2012. When I read this, I immediately realized that this process normally is the other way around, European car manufacturers who move their assembly plants to China due to lower labor costs.But in this article it depicts upon the opening of an assembly plant in Europe by a Chinese car manufacturer. As I kept reading the article I more or less understood why the Chinese manufacturer is making this move. Great Wall Motors is not the first Chinese car manufacturing company that wanted to open up assembly plants in Europe. There were several others; however they have fai led to meet stringent European safety standards.Other Chinese carmakers are also expanding into Europe, as they are buying assembly plants of European car manufacturers to improve the quality of their cars and therefore to meet the stringent European safety standards. This is a way for those Chinese car manufacturers to make progress in quality. So first of all, why in Europe? By producing in Europe, the cars that are produced no longer have to be exported from China to Europe and thus Great Wall Motors is circumventing EU import taxes and tariffs.Therefore, the cars that are produced in Europe are meant to be sold in the European market. This saves Great Wall Motors a lot of money. But then a second question arises; where in Europe? Great Wall Motors did not choose Bulgaria as location for their assembly plants because of its geographical location, but rather for their cheap labor. Bulgaria is the poorest country in the European Union, and therefore is the most attractive location to open an assembly plant because it also has the lowest wages and taxes.However, the labor force is considered as well educated and therefore ensures high productivity levels and operational performance. Another factor that made Great Wall Motors to relocate to Europe, is the fact that wages in China for factory workers have been rising the last few years, and that other car manufacturers have been relocating their assembly plants to countries in Eastern Europe to gain a more competitive edge in the European market. At first, they plan to sell its cars in Eastern Europe and expand later on into other EU countries.Another factor they do not mention in the Article but in my opinion is also highly relevant for this topic is the EU economic crisis. Due to the economic crisis, many people have lost their jobs and therefore have less money to spend. This can be seen as another reason why Great Wall Motors went to Europe because this is a way they can market their cheaper cars to the Euro pean consumers who are very price sensitive due to the economic crisis. This is an opportunity for foreign car manufacturers in general.To conclude, the tables have turned as it used to be European car manufacturers opening up assembly plants in China, and now it is the Chinese car manufacturers opening up assembly plants in Europe. This article resembles the reasons why this change has occurred and why Great Wall Motors has moved their production to the European continent. Article http://www. spiegel. de/international/business/cheap-labor-in-bulgaria-chinese-open-first-car-plant-in-europe-a-816851. html

Ethics of Engineering Essay

Risk can be defined in many different versions basing on the specified use and situational context. It can simply means the future negative circumstances that can be prevented or mitigated, rather than day to day that calls for immediate attention. When it comes to risk management, the word hazard can be used to define a situation that would lead to harm while the word risk would mean a probability of anything occurring. This concept was applied at planning of delta works in the nineteenth century, which is a flood preventing project in western country. The type of risk analysis is now common in sites like chemical industry and nuclear power. Determining engineering risk is somewhere hard especially in industries where there is production of toxic materials. The way forward to measure individual life cost caused by the loss differs basing on the aim or purpose. Most measures entail what individuals are able to give to insure against death (National Academy of Engineering & National Academies Press (US), 2004). Categories of risk -financial risk; is mostly termed as the unplanned variability of returns which covers bad-than-unplanned as well as good-than-desired returns. Basing on statistics risk is always placed to the probability of a number of outcomes that are mostly undesirable (Morse & Babcock, 2009). Often the probability of the event and various assessment of its perceived harm need to be joined into a believable outcome, which joins a group of risk, regret and pay probabilities in a desired value for that same outcome. Risk is therefore assessed as a task of three variables namely – the probability that there might be a negative warning, the presence of vulnerability and finally potential improvement in business. The first two probabilities are joined together and sometimes called likelihood, if any of the named variables above almost results to zero, the whole risk results to zero. Risk can further be defined as a state of lacking complete certainty where a number of possibilities entail a loss or various unexpected outcome. Measurement of risk; a group of possibilities with which each has a quantified probability and quantified losses From the text above it is vital for one to have uncertainty with no risk but not have risk without uncertainty. People can be uncertain concerning who will be the winner in a contest but unless they hold individuals stake in it, they hold no risk (Martin & Schinzinger, 2005). If people bet some finances on the results of the contest, then it is true they have a risk. In this similar occurrences there are different outcome. The value of uncertainty only defines the probabilities kept for outcomes, as the calculation of risk calls for the two outcomes that is probability and quantified (National Academy of Engineering & National Academies Press (US), 2004). Insurance and heath risk – insurance is a type of risk lowering investment whereby the customer gives some agreed amount to be safer incase a negative issue arises. In this way, the customer will be so sure a loss has not occurred. Buying a lottery ticket is a high-risk investment with a possibility of minimal reward but with a high chance of getting a loss (Moriarty, 2008). Banking some funds at a specific rate of interest is also taking a risk although the return is less but guaranteed. Some risks like in individual’s health could be minimized through primary prevention habits that lowers early occurrence of diseases or by secondary avoidance habits once an individual has been exposed to early symptoms and signs that could be a risk factor. Tertiary avoidance lowers the negative outcome of a disease that is already established by minimizing illness- associated complication and restoring the functions. Every medical professional needs clear discussions about risk factors with an individual client to acquire informed consent concerning tertiary and secondary avoidance efforts however the entire medical health efforts in primary avoidance needs education of the public group at risk (Martin & Schinzinger, 2005). In each circumstance, excellent communication concerning any risk factors, predicted results and certainty should differentiate between causal circumstances that need to be reduced and associated circumstances which might be consequences rather than causes (Baura, 2006). Safety It can be defined as a situation of being secure, out of danger injury or risk or in other terms, it means events that call to lower or do away with hazardous situations that can lead to injury of the body. Categories of safety †¢ Occupational safety – it is mainly based with risks in locations where individuals work that is in building and construction, business industries and organizations. †¢ public safety – it deals with hazards in premises, journeys, touring and recreation, and in other various circumstances which is not within the category of occupational safety †¢ Marketing safety – this entails security in purchasing of goods and even in producing. One must be sure the services offered will not lead to a negative outcome (Baura, 2006). On the other hand, the producers themselves should not risk in making a loss for this can cause the closure of a business. †¢ Insurance risk – this avoids a great loss in business or in individuals investment incase an accident or an injury arises, that means the owner is secured. In case of an accident, it is always advisable to analyze the employees’ status of safety measures, which could be affected by outward working environment, attitudes directed to security and accident avoidance work and also leaders’ commitment in security promotion. Such kind of factors could be linked to work stress and risk behavior (Moriarty, 2008). The perceived risk behavior affects negative outcomes like accidents and near misses, while the possibility that discourages improvement in transforming a person’s risk perception towards embracing safety is still not yet clear (Martin & Schinzinger, 2005). Competent verses incompetent A competent engineer is one whose work is recommendable and excellent; he evaluates, assesses and organizes the employees to work with an aim of meeting the company’s goals and objectives. He works under minimal supervision from the seniors, seeks for advice in times of difficulty and consults other professionals to add skills and knowledge (Harris et al 2008). Unlike incompetent engineer who might have no knowledge of his work and his end results after working are disgusting. Maintaining a competent engineer could be challenging unlike the incompetent one. A good engineer has most of the qualification required in his area of assignment; works well to produce excellent results while a good person is generally pleasing and manifests good characters but may be lacking qualifications in his work (National Academy of Engineering & National Academies Press (US), 2004). A person may be competent but lacks good morals this can be evidenced by most of the employers who employ workers on condition to get ‘something’ in return. This is mostly happening in the modern world where most competent individuals have no integrity or character. In conclusion, it is better to risk taking an action despite of the unknown results rather than being safe in a condition whose guaranteed results are negative for example banking money to gain small interest instead of keeping it with you. Reference Baura, G. (2006). Engineering ethics: an industrial perspective. New York: Academic Press. Harris, C. , Pritchard, M. & Rabins, M. (2008). Engineering Ethics: Concepts and Cases, 4th Ed. New York: Cengage Learning. Martin, M. & Schinzinger, R. (2005). Ethics in engineering, 4th Ed. New York: McGraw-Hill Publishers. Moriarty, G. (2008). The engineering project: its nature, ethics, and promise. New York: Penn State Press. Morse, L. & Babcock, D. (2009). Managing Engineering and Technology: An Introduction to Management for Engineers, 5th Ed. New York: Prentice Hall Publishers. National Academy of Engineering & National Academies Press (US). (2004). Emerging technologies and ethical issues in engineering: papers from a workshop, October 14-15, 2003. New York: National Academies Press.

Essay 1 FACH

Essay 1 FACH Essay 1 FACH Essay Child and family health nursing (CFHN) is an area of healthcare in Australia that forms a vital part of primary health care for early childhood. It uses a preventative health care model heavily focusing on population health and health promotion (CAFHNA, 2001). The primary health care philosophy that CFHN revolves around is informed by international, national, state and local policies and guidelines that each have a relationship to coordinate and inform CFHN practices in a given community. Primary health care by definition is helping individuals in the first instance when the care is first needed (McMurray, 2007), and this is exactly what CFHN does in their everyday occupation. Child and family health nurses work at the ground level in the community helping families from when their child is born throughout their early childhood and introducing that family to the community healthcare services available to them (CAFHNA, 2001). Behind the scenes of all this, CFHN is guided by the many le vels of philosophies and guidelines from healthcare authorities directing them to their scope of primary health care practice. Internationally CFHN draws from the universal guidelines from global authorities such as the World Health Organization (WHO). Australia shows its commitment to primary health care through being a signatory of the Declaration of Alma-Ata which originated from a WHO and UNICEF health conference in 1978 in Alma-Ata aiming to achieve Health for All (WHO, 1978). At this conference 134 nations agreed to focus more on primary health care, increase access to healthcare, reduce social inequalities, prevent disease and promote wellness rather than treating just illness and disease (WHO, 1978). This highlights the importance of reaching individuals at the first point of contact within their family and the community setting (WHO, 1978), giving great importance to areas like CFHN. Following on from the Declaration of Alma-Ata, in 1986 the WHO developed the Ottawa Charter for Health Promotion which further influenced community health nursing with philosophies inline with helping empower people to take control over their health, seeing health as a positive concept and incorporating the social as well as physical focus on health (WHO, 1978). This influences the practice of CFHN greatly by valuing the importance of helping the communities at the family level looking at the psychosocial determinants of health, providing information, education, social support and early intervention. The United Nation (UN) plays a large part in informing Australia of global health care visions such as those outlined in The UN Millennium Development Goals (2007) including meeting the basic needs for all through eliminating poverty, increasing education levels, combatting disease, improving maternal health and reducing child mortality. The WHO and UNICEF (2003) also sets CFHN guidelines for breastfeeding and infant nutrition goals within Australia, directing our national policies for this domain. Between the UN, UNICEF and WHO it can be seen that international policies greatly influences the knowledge base that CFHN uses in routine practice within Australia. There are many national policies and guidelines that also direct CFHN in Australia that are more specific and targeted to the Australian population. An example of this can be seen through the Child and Family Health Nurses Association (CAFHNA) guidelines. CAFHNA in conjunction with the Australian Nursing and Midwifery Council (National Board, 2010) competency standards for Registered Nurses and Registered Midwives guide the CFHN in terms of what the professional standard for clinical skills, legal and ethical practice is required to practice as a CFHN (CAFHNA, 2009). These CAFHNA competency guidelines define the scope of practice for CFHN and are a means of evaluating performance and for CFHN to set clinical goals for development (CAFHNA, 2009). These roles defined by CAFHNA include maternal

Free Essays on Mapp V Ohio

,’ valueless and undeserving of mention in a perpetual charter of inestimable human liberties, so too, without that rule the freedom from state invasions of privacy would be†¦ ephemeral†¦Ã¢â‚¬  The exclusionary rule not only applies to federal cases, it also applies to state criminal proceedings. This prohibits... Free Essays on Mapp V Ohio Free Essays on Mapp V Ohio Mapp V. Ohio 367 U.S. 643 (1961) Facts: Mapp was convicted of possession of lewd and lascivious books, pictures, and photographs in violation of Ohio law. Three Cleveland police officers went to Mapp’s resident based on information that a person who was wanted in connection with a recent bombing was hiding out in her home. The officers knocked on the door and demanded entrance, but Mapp, telephoning her attorney, refused to admit them without a warrant. The officers again sought entrance three hours later, after the arrival of more police. When Mapp did not respond, the officers broke the door open. Mapp’s attorney arrived but was denied access to his client. Mapp demanded to see the search warrant the police claimed to possess. When a paper supposed to be the warrant was held up by one of the officers. Mapp grabbed the paper and places it in her bosom. A struggle ensued and the paper recovered after Mapp was handcuffed for being belligerent. A search of the house produced a trunk that contained obscen e materials. The materials were admitted into evidence at the trail and Mapp was convicted of possession of obscene materials. Issue: Fourth Amendment (Exclusionary Rule) Court: United States Supreme Court Reason; â€Å"Since the Fourth Amendment’s right of privacy has been declared enforceable against the States through the Due Process Clause of the [Fourteenth Amendment], it is enforceable against them by the same sanction of exclusion as is used against the Federal Government. Were it otherwise, then just as without the Week rule the assurance against unreasonable searches and seizures would be ‘a form of words,’ valueless and undeserving of mention in a perpetual charter of inestimable human liberties, so too, without that rule the freedom from state invasions of privacy would be†¦ ephemeral†¦Ã¢â‚¬  The exclusionary rule not only applies to federal cases, it also applies to state criminal proceedings. This prohibits...

Engineering Essay Example | Topics and Well Written Essays - 1500 words

Engineering - Essay Example Figure 1: Kariba Dam on the Zambezi river: Zambia/ Zimbabwe Source: http://www.internationalrivers.org/es/kariba-dam/kariba-dam?size=_original Furthermore it also offers valuable lessons in the manner in which a project of such huge magnitude was pulled off successfully in those days, considering the situation in the 1950s. Also, the construction of this dam required displacement of a large number of people living in or near by the dam site, thus attracting various social repercussions in the process (Adey, 2009: 116). The various implications of the establishment and implementation of this project are discussed in the following sections. Geological Setting The Kariba Dam is a double curvature arch concrete dam, reinforced with a spillway gate area (Balon & Coche, 1974). The Zambezi river, prior to reaching Lake Kariba, falls into various slot like gorges, which forms the Victoria falls. The drainage basin of the Congo River lies to the north of Zambia. Topographically, a significant portion of the Zambian territory comprises of an elevated plateau with an altitude of approximately 3000 to 4500 feet. There are highlands in the northeast and northwest territories of the country, with the Muchinga Mountains in the northwest having elevations of approximately 5900 feet. The population centres in Zambia are formed of two key areas, i.e. in the capital city of Lusaka and in the copper belt province of north central Zimbabwe, which comprise of rich deposits of copper ore (Stokes, 2009:751). Figure 2: Physical characteristics of Kariba Dam The soil in the Kariba river basin is deep Kalahari sand formation (Bingham, 2000) thus allowing the water to permeate in it quite easily. This is known to be one of the key reasons behind the occurrence / or high incidence of earthquakes in the area. Since the land was filled with excessive weight (i.e. water) the earth below it breaks down due to the added volume, leading the ground to break. There is evidence relating the level o f artificially created lakes and seismic activities in the area, leading to increased incidences of earthquakes (Jansen, 1988: 744; Goudie & Alexander, 1997: 40). The dam was initially built with a view to generate hydroelectric power; however, the creation of the same drastically altered the geography of the land including significant changes and alterations to the biodiversity of the neighbouring areas. The Kariba Lake was located in the tropics and was one of the first projects to be built in the region. It was created by damming of the Zambezi River which flowed between the two countries i.e. Zambia and Zimbabwe in the year 1959. The building of this lake was referred to as an audacious engineering feat since it was created by clearing up a large proportion of the lands leading to displacement of thousands of locals (Gray, 2000:69). Major problems encountered The construction of the Kariba dam brought about significant changes in the area, especially the generation of electricit y which was the key purpose behind the dam. However, it also led to several problems which are discussed below: Displacement of large number of people: The creation of the dam required displacement of the Tonga tribesmen, who inhabited the area. As many as 75000 tribal people were relocated to other areas during